RESIDENTIAL EDGE PROTECTION SYSTEMS

Showing all 15 results

  • Fascia Pole System

    Read more

    Fascia Pole System

    Our Fascia Pole System was developed specifically for re-roofing. The system is easy to install and allows roofers to remove and replace old or damaged metal or tile roofs without having to fix to the battens or rafters, providing free access to the entire roof surface. The bracket can be either clamped on or screwed to the fascia depending on site conditions. The clamping mechanism is designed to avoid damage or penetration to the fascia. This system has been used extensively for insurance repair work after storms or hail damage and is the best pole edge protection system available on the market. Our Fascia Pole System is available to dry hire or buy.

    Learn More
    SKU: R1003 Category:

  • Fascia Pole System

    Read more

    Fascia Pole System

    EWRG’s Fascia Pole System is an excellent edge protection solution for a range work on residential roofs. The system uses a ground up pole and fascia bracket (which can either clamp or screw to the fascia) to provide a roof handrail which does not obstruct work on the roof. This allows full access to the roof for residential solar installation, roof restoration, roof maintenance or roof painting. The system can be used at both the gutter line and gables of the roof where the fascia can be accessed.

    Learn More
    SKU: R1007 Category:

  • Gable Systems

    Read more

    Gable Systems

    EWRG have a range of solutions to provide temporary roof edge protection for residential gables or skillion roofs. Please contact us to find out more about our systems.

    Learn More
    SKU: R1012 Category:

  • Hidden Tile System

    Read more

    Hidden Tile System

    For re-roofing roof restoration, roof painting or maintenance on tile roofs, the Hidden Tile System provides a handrail solution which fixes to the rafter and can then be completely concealed under the tile. This is important when working on existing roofs as it maintains the waterproof integrity of the roof while work is being undertaken. If the roof is being pressure washed or rain falls during work, the roof can function as  The system has the additional benefit of allowing access to 100% of the roof surface. 

    Learn More
    SKU: R1005 Category:

  • Hidden Tile System

    Read more

    Hidden Tile System

    Ideal for use when installing solar PV panel on tile roofs, tile roof restoration or tile roof painting, EWRG’s Hidden Tile System is a simple-to-use tile roof edge protection solution which provides full access to the roof surface while maintaining waterproof integrity of the roof. The Hidden Tile Bracket is screwed to the rafter along the gutter line, allowing the bottom to be placed back over the top of the bracket. The Hidden Tile System is available for purchase or dry hire.

    Learn More
    SKU: R1008 Category:
  • Placeholder

    Keyhole Bracket

    Read more

    Keyhole Bracket

    Coming Soon.

    Learn More
    SKU: R1013 Category:

  • Rafter Clamp System

    Read more

    Rafter Clamp System

    The EWRG Rafter Clamp System is an under fascia edge protection system allowing full access for metal and tile roof installation. The bracket clamps quickly onto the rafter and  provides an adjustable post support which spans out under the fascia and gutter. The Rafter Clamp system fits standard and most non-standard trusses for both timber and light gauge steel rafters.

    Learn More
    SKU: R1001 Category:

  • Screw-on Mounting Bracket

    Read more

    Screw-on Mounting Bracket

    Our Screw-on system can be screwed onto beams or top plate and studs to provide a simple first floor edge protection for residential construction. This is an ideal product for builders and scaffolders that require first floor edge protection. Mounting plates are fixed with three timber screws and can be installed at 3m spans. The system can be screwed or bolted on, allowing it to be used for a range of other applications, including roof guardrail for concrete tilt panels, block retaining walls, brick, timber fascia and steel fascia purlins.

    Learn More
    SKU: R1010 Category:

  • Side Bracket System

    Read more

    Side Bracket System

    EWRG's Side Bracket is ideal for providing first floor edge protection along timber beams. The side bracket combines a mounting plate with a post (upright) sleeve into a single bracket. The brackets can be set to a maximum of 3m apart and can also be used on steel, concrete, core filled blockwork and brick. Available for hire or sale.

    Learn More
    SKU: R1011 Category:

  • Sliding Roof Entry Gate

    Read more

    Sliding Roof Entry Gate

    Our sliding roof entry gate is designed for ladder entry onto roofs with EWRG edge protection systems. The gate's design allows the ladder to sit securely during use. The gate can then be slid open and the worker enter or exit the roof while maintaining three points of contact.

    Learn More
    SKU: R1014 Category:
  • Placeholder

    Solguard System

    Read more

    Solguard System

    Solguard is EWRG's patented solar edge protection system - specifically designed for solar panel installation on metal roofs. The Solguard Bracket and Barge Boot are designed to provide a roof guardrail solution which does not obstruct the installation of mounting rails or solar panels to the roof. It is the only system available that maintains engineering integrity throughout the entire installation of solar panels. The system works whether panels are being installed in a 'portrait' or 'landscape' configuration and adjusts to the pitch of the roof.

    Learn More
    SKU: R1006 Category:

  • Thru Tile System

    Read more

    Thru Tile System

    Our Thru Tile Edge Protection System is designed for use on new tile roofs. This is a traditional tile edge protection system that provides handrail at the gutter line. The bracket is very easy to install and simply screws into the rafter, allowing roof tilers safe access to the roof. Following installation of tiles, the system can be dismantled, with the last few tiles adjusted into place along the gutter line. EWRG both dry hire and sell the Thru Tile System.

    Learn More
    SKU: R1004 Category:

  • Tomahawk Bracket System

    Read more

    Tomahawk Bracket System

    The Tomahawk Bracket is specifically developed for first floor edge protection. The bracket is adjustable to span floor joists to fix to the sides or ends of smart joists (also refered to as I-Joists or LVL Joists. It can also fix just as easily to first floor beams or lintel beams around the perimeter of the building frame. The Tomahawk System is available for hire or sale.

    Learn More
    SKU: R1009 Category:

  • Top Plate Bracket

    Read more

    Top Plate Bracket

    EWRG's Top Plate Bracket System is designed to provide edge protection where there is no eave or minimal roof overhang. The system is design to hang over the top plate and provide a support where overhangs ranging from 350mm to 700mm from the wall. 

    Learn More
    SKU: R1002 Category:

  • Trailer Packages

    Read more

    Trailer Packages

    EWRG offer a range of purpose built trailers to accommodate our roof edge protection systems. Trailers are advantageous for smaller businesses as their roof guardrail systems can be easily moved and handled directly from the trailer, simplifying storage and transport. The trailers we offer are constructed with strong, corrosion resistant alloy material, come in a range of sizes and include racking for rail or pole as well as lockable boxes for brackets, posts and other components. Trailers can carry more than just one system and can be further customised depending on our Customer's requirements.

    Learn More
    SKU: R1015 Category: